Product Overview
Stage II pumps increase the overall flow by machining a deeper pocket into the oil pump and fitting larger gears in this pocket. This increases the strength of the pump, increases mid-range oil pressure, and increases the strength of the oil pump gears.
The Stage II Pumps have these additional modifications:
-
Larger gears are fitted into the oil pump which increases mid range protection and insures compatibility with VVT.
-
The pump is shimmed increasing maximum warm pressure from 60 PSI to 70 PSI.
All assembled billet pumps undergo the following:
-
Pump is completely taken apart, all parts under go ultrasonic cleaning, air blast, and hand inspection.
-
Pump is hand de-burred.
-
Our industry leading mirror finished gear set is used
-
Stainless Torx heads replace the stock fasteners
-
All fasteners are torqued to spec
-
Loctite applied to fasteners to prevent back out or loosening
-
Anaerobic sealant applied to critical areas to boost pump up speed and reduce aeration.
-
Assembly lubricant applied to all critical surfaces to get oil flowing fast on startup
-
Parts are blue printed and issued with specification sheet.
